On behalf of our client, a prestigious Italian multinational group leader in the Apparel & Fashion sector, we are currently recruiting a Plant General Manager to be based in Tunisia. Scope: This role is the interface between the local Plant and the BU Headquarter in Italy, being in charge of Operations, Finance and Production. Moreover he is directly responsible for the P&L of the plant and for the quality of the service; maintain good relations with the local clients. TASKS AND RESPONSIBILITIES: Production Planning. Prepare, analyze and issue production and performance reports Monitor operations and trigger corrective actions where needed, in the following areas: production, quality control, maintenance Coordinate plant activities through the planning with departmental managers to insure the total manufacturing objectives are accomplished in a timely and cost-effective manner. Responsible for overall purchasing strategy, identifying and implementing best practices to improve efficiency and productivity Establish, lead and implement comprehensive material and inventory planning Outsource and lead local contractors’ performance Contribute to develop the skills and capabilities of the plant employees Ensure properly staffing of plant to meet production levels and goals REQUIREMENTS: Bachelor of Engineering/Science or equivalent skills 10+ years’ experience in a multinational manufacturing environment and at least 5 years in a similar leadership role Working experience in Tunisia or North Africa is a must Fluent English, the Italian knowledge is a plus Strong team working attitude, good project and time management Workplace: Tunisia  

Per l’azienda nostra cliente, multinazionale italiana nel settore della cantieristica navale, cerchiamo:     HR TRAINING SPECIALIST     A riporto dell’HR Director, la risorsa si occuperà di provvedere alla programmazione, erogazione e monitoraggio degli interventi di formazione per il personale dell’azienda nel rispetto delle strategie e policy aziendali.     Nello specifico si occuperà:   Raccolta dei fabbisogni formativi che saranno analizzati, valutati e approvati dal Direttore HR. Monitoraggio e Supervisione del Budget della formazione e del conto formazione di Fondimpresa e Fondirigenti. Ricerca di altre fonti di finanziamento (es. bandi pubblici ecc.). Programmazione degli interventi di formazione: predisposizione di un Piano di Formazione annuale e non. La progettazione avviene attraverso la pianificazione dei singoli interventi di formazione. Individuazione delle risorse (finanziarie, strumentali, logistiche). Le modalità di erogazione, tempi, durata. Realizzazione dei corsi di formazione: Gestione logistica, amministrativa, contabile e di rendicontazione. Appronta e verifica logistica (aule, strumenti, supporti didattici ecc.). Monitoraggio e valutazione dei risultati: Raccolta e analisi dei questionari di apprendimento. Somministrazione, raccolta e analisi dei questionari di gradimento. Gestione del processo di rendicontazione per la richiesta del rimborso in caso di utilizzo dei Fondi Interprofessionale e/o di altri Fondi di finanziamento. Aggiornamento a Success Factor della formazione effettuata da ogni dipendente e archiviazione cartacea dei documenti relativi ai corsi svolti. Assicurare l’aggiornamento mensile dell’organigramma   Requisiti richiesti: esperienza nel ruolo di almeno 4-5 anni buone capacità organizzative e relazionali     Sede di lavoro: Forlì  

For a prestigious multinational group, leader in the industrial sector, we are looking for a/an brilliant:  GLOBAL SUPPLY CHAIN MANAGER (Italy and abroad) As Global Supply Chain Manager, you will report directly to the CEO and take on a corporate role that includes driving logistics strategy, optimizing processes, and integrating procurement activities to build a cohesive and efficient supply chain. Responsibilities: Enhance Communication and Synergy: Strengthen alignment between logistics and procurement by closely collaborating with both strategic and operational teams, ensuring streamlined and effective workflows. Optimize Supply Chain Practices: Review and update supply chain processes to align with company standards, industry regulations, and best practices. Drive Logistics Strategy: Implement and oversee logistics strategies to support smooth, efficient operations across the supply chain. Plan & Manage Procurement: Collaborate with the purchasing and PM teams to optimize procurement planning and maintain efficient resource allocation. Negotiate & Collaborate: Work closely with suppliers and freight companies to negotiate terms, set pricing, and ensure performance excellence.   Skills: Extensive Supply Chain Expertise: Solid background in supply chain management, including logistics. Leadership Skills: Proven expertise in leading and integrating diverse teams. Strategic Mindset: Skilled in planning, systems analysis, and evaluating complex workflows. Strong Interpersonal Skills: Excellent communication, empathy, and leadership abilities. Fluency in Italian and English: Required for this international role.   Location: Province of Modena

For a multinational company operating in packaging sector, we are looking for a   BUSINESS DEVELOPMENT MANAGER ITALY AND EMEA   Manages assigned key account relationships. Protects existing business and grows sales within key customers. Leads business develop initiatives to penetrate key accounts in new regions and product categories. Sets and maintains strategy for these customers. Main activities and responsibilities: Penetrate and develop relationships with assigned account targets. Compile strategies and plans to grow business in specified customers, markets, or geographic regions. Populate and maintain Dynamics pipeline with impeccable accuracy in order to measure success. Meet and exceed sales growth targets. Understand and communicate the market trends and competition for the region. Secure contracts for new projects to lock in growth. Compiles information and data related to customer and prospect interactions. Travels for in-person meetings with customers and partners and to develop key relationships. Qualifications, personal and technical skills Degree in related field or degree level. 5 years’ experience in Business Development. Experience working in a manufacturing industry. Knowledge of FMCG market. Proven success, knowledge and experience growing sales. Pipeline management and forecasting skills including sales planning and territory management. Building relationships, managing sales processes and negotiation skills. Developing budgets and forecasting Computer literate (word, excel, ERP) Excellent English verbal and written communication skills. CRM experience. Ability to work with shared leadership and in cross functional teams. Strong listening skills, customer focused, ability to manage own time, organize and prioritize numerous activities, excellent problem solving skills. Location: remote work (HQ near Vicenza)

For a leading Tier 1 multinational company in the Automotive sector, we are looking for a:   AUTOMATION ENGINEER   The figure, included in the Automation & IoT Department, reporting directly to the Division Manager, will have the following responsibilities:   To develop, in codesign with supplier during the preliminary concept of the product/project, the needed suitable automation solutions to guarantee the best balance between local labour cost and investment amount, consistently with process variable cost estimation in the offer phase To define the technical specifications ( including machine description, capability with parameters and required standard,..) of the machinery or tools related to the involved section of the process ensuring the application of the standards To collaborate with the Purchasing dept. in the supplier Machinery/ tools nomination phase through the offer analysis To collaborate with Product Design for the tools feasibility To manage the investments of the machinery / tools ensuring the adherence of the spending according to the foreseen cost in the offer phase To define the supplier activities schedule for each machinery / tools, consistently with the overall product development Gantt. To monitor the construction progress status, visiting periodically the supplier site and defining, in case of deviations, suitable recovery action plans agreed with Process Leaders To ensure the supervision of the technical test of the machinery / tools at the supplier site, verifying the compliance with technical requirements and expected cycle time target; to give the approval for the machinery / tools transfer to the manufacturing plant according to the existing acceptance rules To define the typology and the amount of materials and auxiliary tooling that are necessary for the testing of the machinery To manage machinery / tools modification and tuning after each test To organize, in case of specific dedicated project, the FMEA process in order to identify the quality risk of the product and put in place the automatic controls To guarantee the availability of make components (by soft or hard tooling) consistently with the product development plan To coordinate the machinery / tools handover to the manufacturing plant coordinating the activities related to the industrial trials in collaboration with the plant To coordinate the installation and acceptance and of the machinery/tooling, monitoring and confirming its capability with the plant Production Engineering for the final approval To provide the plant Production Engineering with the technical data (machine guide, utilization manual, spare parts list,..) concerning the new machinery / tools , supporting them in the training of the involved associates To collaborate in the definition of the required actions to set up the area of the installation of the machine ( including water, air, electric energy ,..) and to guarantee the legal and safety compliance To collaborate in the preparation of the preventive maintenance sheets/plan and manual To collaborate with the Production Engineering of the plant in the machinery modification and improvements. To support the plants in the kaizen activities collecting the improvement ideas and defining potential new standards     Skills requested:   Mechanical design Basic electrical design knowledge Machinery directive (Safety) Vision Systems Robots Spec definition & Project management Economics English  

For a prestigious multiational group leader in its sector, we are looking for a/an:   DEPOT MANAGER   Reporting to the Divisional Managing Director, the resource will have the following responsibilities:     Main duties    Managing the day-to-day operations of the depot; Recruiting and mentoring staff; Managing a customer base and developing plans to increase business; Maximising growth and profitability; Ensuring that high levels of service are maintained; Liaising with key customers to make sure they’re satisfied with the depot’s performance; Agreeing service contracts and dealing with suppliers; Managing stock levels; Monitoring health and safety in the depot; Analysing turnover and profitability; Meeting with area and regional managers to share best practice.   Main requirements   Fluent in English; 5/10 years of experience, able to work under stress; Flexible, agile, teamwork oriented; Curious and proactive; Able to talk with upper stream management and downstream management; Problem solving capabilities.   Workplace: Turin

Sei interessato/a ad entrare in un team di R&D dedicato allo sviluppo di prodotti per la mobilità di domani? Brembo, perseguendo la sua mission di Solution Provider attraverso soluzioni sempre più digitali, connesse e sostenibili, con il supporto di Consea è alla ricerca di profili ingegneristici meccatronici, meccanici, elettronici di eccellenza, da inserire nel proprio organico. Potresti far parte del gruppo che ha sviluppato SENSIFY il pionieristico sistema frenante che integra l’intelligenza artificiale per offrire un’esperienza di guida unica, cosa aspetti?                                 JUNIOR SOFTWARE TEST ENGINEER ABOUT THE JOB Il/la Software Test Engineer si occupa di assicurare la validazione del software e di implementare le funzioni safety critical sia del software non safety critical, sviluppati per sistemi meccatronici, nel rispetto delle scadenze previste e delle normative di riferimento adottate, inclusa la produzione della documentazione di supporto. RESPONSABILITIES Garantire la validazione dei software safety critical e non sviluppati per sistemi meccatronici, nel rispetto delle scadenze previste e delle normative adottate di riferimento Contribuire alla pianificazione e l'esecuzione dei test per la validazione dei software applicativi e di tipo safety critical Contribuire all'implementazione delle fasi di processo come stabilite dalle normative di riferimento per quello che concerne l'attività di test del software, inclusa la produzione della documentazione di supporto Eseguire e pianificare i test di validazione (SIL/HIL e fault injection) dei sistemi elettronici sviluppati da Brembo, definire e gestire i modelli di simulazione di veicolo e di sistema e interfacciarsi con il team di sviluppo software, applicazione su veicolo e system engineering Il candidato/a ideale è in possesso di una laurea in Ingegneria dell’automazione, controllo, meccatronica, ha un’ottima conoscenza della lingua inglese, delle spiccate abilità relazionali, una propensione al lavoro in team ed è fortemente orientato a modalità di lavoro in ambito software. È richiesta la conoscenza dei tool Matlab, Simulink e DOORS.Conoscenza della metodologia Automotive SPICE. Si richiedono 1-2 anni di esperienza nel mondo Automotive.

You will have the opportunity to create and develop footwear products for Men’s and Women’s and be involved in the creative process. You will have a direct, daily contact with the footwear factory in Italy (Marche area), and will pilot the development of all products within the timings requested, for both mens and womens, and both runway and pre-collections. You will report directly to the Owner and to the Head of Collections development and Merchandising. Your key accountability : Proficient ability to apply and perform graphic design skills Understand and present design concepts Proven technical knowledge and skills in order to accurately provide information to designer, and accompany the technical development of the products by the footwear team in Marche. Proven ability to manage multiple projects and timelines at all stages, design reviews, product management interaction Who you are : 3 to 5 years experience Excellent drawing skills Computer literate using Macintosh computer Ability to use Photoshop, In Design and Illustrator Driving license Avaibility to travel to the shoes factory (Marche area) and the studio (Reggio Emilia area) when requested.  

For an important company, leader in the sector of electric motors for the household appliances sector, we are looking for a:   SENIOR BUYER The Senior Buyer is part of the Purchasing Department within Global Supply Chain and reports to the head of Procurement & Supply Chain. He / she will play a pivotal role in support to the company's procurement strategy growing in the Function to assume the role of Purchasing Manager. MAIN ACTIVITIES AND RESPONSIBILITIES To manage indirect procurement, including the purchasing of goods, services, supplies, and materials needed for daily operations.  To work with a high level of autonomy of control and management of the supplier’s relationship and liaising closely with Technical Dept., Production, Finance and Sales to achieve targeted performance.  To perform a procurement role for assigned product categories, by developing effective procurement strategies to ensure cost-effective, timely and high-quality procurement.  To manage risks and source new suppliers including validation, contractual negotiation and supply transition management.  To support project buying activities for new products. To be responsible for the proper execution of Procurement Processes in the areas of Strategic Management and Source to contract.  To be accountable for daily monitoring performance and results.  PROFESSIONAL AND TECHNICAL SKILLS Technical or business university degree: Engineering or Management   Broad and proven track record of procurement experience in manufacturing companies, multinational preferential (5 plus years). Demonstrates best cost sourcing in a technical environment.   Proven contractual negotiating skills.  Broad experience with supplier contracts and agreements, additionally project management within multi-disciplinary teams.   Strong analytical skills.   Fluent in English.  Proven ability to conduct complex, quantitative and statistical analyses complimented with qualitative inputs from multiple sources to draw conclusions and make recommendations.  Logical thinker with a good attention to detail and high level of commitment. Proficiency with ERP systems including DRP/MRP, purchasing and inventory modules is a plus . Proficient in use Lean tools whenever applicable and collaborating with other functions within the end-to-end supply chaiN.   Strong User capability and experience with Power BI and MS Office, specifically with Excel (advanced), Word, Access is essential. SEDE DI LAVORO: Olgiate Comasco (CO)

Per una prestigiosa azienda multinazionale leader nel suo settore, stiamo cercando un:   CONTROLLER Riportando al Finance Manager, la risorsa avrà le seguenti responsabilità:   Rileva e controlla le imputazioni dei costi nei centri di competenza per l’attendibilità delle rilevazioni. Garantisce la logica riallocazione dei costi ai singoli centri di costo, aggiornando la manualistica e reportistica necessaria. Coordina il prospetto di contabilità industriale al fine di efficientare le linee produttive ed i costi unitari di prodotti. Verifica il rispetto delle procedure aziendali in materia amministrativa da parte di tutti gli utenti interessati. Monitora l’esposizione creditizia, verifica i pagamenti da parte dei clienti e predispone i relativi reports. Monitora le attività amministrative rispettando scadenze e procedure. Prepara le statistiche relative a tutti gli adempimenti amministrativi. Analizza i forecast e relative deviazioni al fine di individuare opportunità di miglioramento. Partecipa alla redazione del budget annuale. Fornisce supporto alle attività contabili e fiscali.   Principali requisiti Laurea in Ingegneria Gestionale o Economia Aziendale. Almeno 5 anni esperienza nel controllo di gestione (contabilità dei costi, controllo del budget, ecc.). Conoscenza di economia e amministrazione aziendale e delle normative contabili, finanza di impresa e fiscali. Esperienza nelle tecniche di forecasting, controllo e reporting. Ottima conoscenza di strumenti per l’analisi dati (excel, power BI, etc..). Gradita conoscenza dell’ERP Microsoft Business Central Buona conoscenza della Lingua Inglese (B2) Accuratezza, precisione, flessibilità/adattabilità. Ottime capacità comunicative e relazionali. Attitudine al Problem solving. Abitudine a lavorare sotto stress e nel rispetto delle scadenze. Predisposizione al lavoro in team.   Sede di lavoro: Casarile (MI) o Torino