© Consea 2022. All right reserved
© Consea 2022. All right reserved
Per azienda settore lusso sita nella Riviera del Brenta ricerchiamo HSE Manager che si occuperà di gestire tutte le tematiche relative alla Salute, Sicurezza ed Ambiente.
Sarà inoltre responsabile del rispetto del budget assegnato alle aree di competenza.
PRINCIPALI RESPONSABILITA’
SALUTE e SICUREZZA
AMBIENTE
Profilo
Desideriamo incontrate candidati e candidate in possesso dei seguenti requisiti:
Per primaria realtà multinazionale del settore Automotive, stiamo ricercando un/una: RESPONSABILE MANUTENZIONE La risorsa, a riporto del Responsabile Tecnologie, avrà la responsabilità coordinare il team di manutenzione del Plant Produttivo nelle sue attività PRINCIPALI RESPONSABILITÀ Coordinare un team di manutentori meccanici ed elettrici Assegnare gli interventi al personale fornendo le istruzioni necessarie nel rispetto dei tempi fissati e delle priorità definite Sovrintendere il personale assegnato facendo osservare le norme e le misure in materia di salute, sicurezza e ambiente Analizzare la frequenza dei guasti e proporre azioni correttive e di miglioramento sugli impianti e sulle macchine Predisporre e aggiornare i piani di manutenzione (TPM) per tutte le macchine e gli impianti in utilizzo mediante SW Prometeo Seguire l’avviamento dei nuovi impianti in produzione, interfacciandosi con le Tecnologie Assicurare il miglioramento continuo di attrezzature e impianti assegnati Rispondere della corretta esecuzione dei lavori, verificare i tempi di esecuzione ed accertare le cause di variazione rispetto alle date e ai tempi preventivati Assicurare la disponibilità dei ricambi per gli impianti produttivi coordinandosi con l’ufficio acquisti (gestione, codifica e riordino) Gestire, coordinandosi con il Servizio Prevenzione e Protezione, i rapporti con gli enti di controllo per le revisioni periodiche degli impianti e attrezzature REQUISITI Laurea in Ingegneria o diploma tecnico in elettrotecnica/elettronica Ottima competenza in materia elettronica/elettrotecnica Ottima conoscenza della normativa in materia di sicurezza e ambiente e della direttiva macchine Precedente solida esperienza in ambito produttivo e/o manutentivo Buona conoscenza della lingua Inglese Ottima conoscenza della tecnologia meccanica, del disegno tecnico e degli schemi circuitali Buona conoscenza dei linguaggi di programmazione dei PLC Ottima conoscenza degli indicatori di gestione (OEE, RGI, ecc.) e delle metodologie di Problem Solving, 5S Conoscenza delle metodologie di gestione dei progetti (diagramma di Gantt, Flow Chart, FMEA di processo) Conoscenze informatiche per la stesura della documentazione necessaria: utilizzo Autocad, utilizzo dei principali SW applicativi di Office (Excel, Word, Power Point, Visual Basic, ecc...) Ottime capacità organizzative e di gestione di team di lavoro Sede di lavoro: Cintura Sud di Torino
On behalf of our client, a North American company producing and selling pressure equipment, we are currently recruiting a Manufacturing Engineer Reporting Line: China General ManagerLocation: Pinghu (Jiaxing), China We are seeking a seasoned Manufacturing Engineer. This role involves close collaboration with the engineering team at headquarters in NA, focusing on innovative project development, quality improvement, and efficiency enhancement.Responsibilities Design and Development: Develop and refine manufacturing processes for power equipment. Collaborate with the engineering team in HQ to ensure design compatibility and projec alignment. Hands-on Product Development: Engage in the hands-on development and testing of new products. Work directly with the fabrication and CNC departments to bring designs to life. Quality and Efficiency Improvements: Identify areas for potential quality and efficiency improvements within the manufacturing process. Implement changes and monitor their impact on production quality and output. Help push the organization to a quality first mindset Collaboration with Departments: Work closely with the fabrication, CNC, production, and manufacturing departments to ensure seamless operations. Facilitate communication and collaboration between departments to meet project goals. Training and Mentorship:Develop training programs and materials for the quality control department. Mentor and train quality control staff to enhance their skills and understanding of manufacturing processes and quality standards. Documentation and Reporting: Prepare detailed technical documentation, including process designs, improvement plans, and quality reports. Provide regular updates and reports to management and the HQ engineering team. Requirements and Qualifications Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, or a related field. A Master's degree is a plus. 5-10 years of experience in manufacturing engineering, preferably in the power equipment manufacturing industry. Proven experience in designing and developing manufacturing processes and systems. Hands-on experience with fabrication and CNC processes. Strong understanding of manufacturing engineering principles and practices. Proficiency in CAD software and manufacturing process simulation tools. Excellent problem-solving skills and attention to detail. Effective communication and collaboration skills. Ability to train and mentor team members. Proficiency in English is required; proficiency in Mandarin is a significant advantage. If you are interested to know more about the opportunity, please send your CV to Mr Massimo Boero at: m.boero@conseachina.com
For a multinational company specialized in the automotive sector, we are looking for: PRODUCTION ENGINEER MANAGER MAIN RESPONSIBILITIES Identify Plant production needs in the different areas, quantifying benefits and costs, capex request & approval; Carry out improvement projects (technology upgrade, maintenance, quality, safety, efficiency projects); Manage & plan suppliers’ activities in order to respect installation times and requested technical specifications; Be responsible of plant production lines/machines, with the aim to improve the Overall Equipment / Line Effectiveness (OEE / OLE); Support maintenance team to work on and solve critical issues; Support new products industrialization; Coordinate a team of process technologists QUALIFICATION & REQUIREMENTS Master’s Degree in Mechanical Engineering Strong experience in Manufacturing Engineering with increasing responsabilities Analytical approach, Data Management and Problem Solving Ability to set and manage multiple technical priorities through a win win approach Sede di lavoro: Avellino
For our client in the luxury sector, we're looking for a: COLLECTION MERCHANDISING MANAGER / CONSULTANT COLLECTION MERCHANDISING Main activities and responsibilities: • Gather selling on different markets and channels (retail, franchising e wholesale) to structure the collection • Gather feedback on products from the market fostering initiatives and special project to meet needs of different markets • Monitoring both on a qualitative and on a quantitative levels competitors on pricing, products, materials, shapes • Elaborating and establishing the collection plan (functions, price ranges, number of lines, model types etc) • Managing the process of defining price objectives for the collections • To guarantee activities in order to support during editing of samples for finalizing final offers and display programs • Supporting in defining products purchasing packages adapted according to different features/dimensions of Boutiques and shops • To guarantee commercial forecast activities related to collections’ trends (sell out forecast to allow Production start over) • Training sessions organization in show room before buying office start to show to sales associates, Boutique managers and Retail employees the collection mood, the materials, the products and accordingly the different way to utilize them. • Managing of any unplanned Special project Requirements: • 7 - 10 years experience in Merchandising/Marketing • 7 – 10 years experience in Fashion/Luxury • Strong knowledge of RTW • Bachelor’s Degree or equivalent required • Analytical, organizational skills and strategy building skills • Excellent written, verbal, presentation, relational skills, flexibility, open minded approach • Judgment and mature business skills; flexibility, open minded approach • Goal oriented approach, multitasking • Fluent English, knowledge of French is a plus CTD or placement as temporary/consultant
Sei interessato/a ad entrare in un team di R&D dedicato allo sviluppo di prodotti per la mobilità di domani? Brembo, perseguendo la sua mission di Solution Provider attraverso soluzioni sempre più digitali, connesse e sostenibili, con il supporto di Consea è alla ricerca di profili ingegneristici meccatronici, meccanici, elettronici di eccellenza, da inserire nel proprio organico. Potresti far parte del gruppo che ha sviluppato SENSIFY il pionieristico sistema frenante che integra l’intelligenza artificiale per offrire un’esperienza di guida unica, cosa aspetti? SENIOR SYSTEM TEST TECHNICIAN ABOUT THE JOB Il/la System Test Technician partecipa alle attività di sperimentazione di sistemi elettromeccanici e elettroidraulici innovativi, assicura l’esecuzione di prove di sviluppo e validazione su banchi statici e dinamici con l’obiettivo di verificare la corrispondenza dei prodotti alle specifiche di progettazione e ai requisiti stabiliti dagli enti di sviluppo tecnico e dai Clienti, in ottica di sviluppo prodotto. RESPONSABILITIES Contribuire alla definizione dei diversi tipi di test (integrazione, sicurezza, funzionali e di durata) di sistemi, sottosistemi e componenti per le varie fasi di progetto (sviluppo, validazione); Contribuire a definire e/o migliorare i documenti, metodi, procedure, processi e strumenti specifici per l’area di appartenenza; Contribuire alla realizzazione, alla manutenzione, alla taratura della strumentazione dei banchi di prova; Contribuire alla preparazione, all'allestimento e all’esecuzione dei diversi tipi di test; Analizzare i dati acquisiti, compilare e redigere le relazioni di prova; Contribuire all’analisi degli scostamenti e alla ricerca di possibili cause, proponendo eventuali soluzioni in ottica di miglioramento continuo; Assicurare una continua attività critica di controllo preventivo in termini di sicurezza. Il candidato ideale è in possesso di un Diploma meccanico, meccatronico, elettromeccanico, elettrotecnico, elettronico, ha delle spiccate abilità relazionali, una propensione al lavoro in team ed è fortemente orientato a modalità di lavoro sul campo.
Il Plant HRBP, riportando direttamente al Direttore Generale, sarà responsabile dell'implementazione delle politiche e delle procedure HR all'interno dello stabilimento (sito in Toscana). Sarà responsabile della gestione dei seguenti processi: reclutamento, onboarding, relazioni con i dipendenti, conformità, formazione, buste paga, retribuzioni e benefit. Dovrà inoltre essere in grado di comprendere i problemi aziendali e apportare soluzioni basate sulla strategia aziendale. Principali responsabilità: Responsabile del reclutamento e della gestione dei dipendenti dello stabilimento. Collabora con la direzione dello stabilimento nel mantenere i livelli di personale entro il budget. Elabora le buste paga settimanali dello stabilimento e amministra la politica delle presenze. Interpreta e applica le politiche aziendali, i vantaggi, le pratiche, le procedure, i programmi e le leggi applicabili. Mantiene registri e compila report riguardanti dati relativi al personale quali assunzioni, turnover, programmi per i dipendenti, valutazioni delle prestazioni, progressione salariale e tassi di assenteismo. Pianifica e coordina l'inserimento di nuovi dipendenti per promuovere un atteggiamento positivo verso gli obiettivi organizzativi. Analizza le esigenze di formazione per progettare la formazione e lo sviluppo dei dipendenti e della leadership, compresi i programmi di sicurezza. Funge da collegamento tra la direzione e i dipendenti gestendo le domande e assistendo nella risoluzione delle questioni relative ai dipendenti. Fornisce una guida efficace alla direzione dello stabilimento, in relazione alle preoccupazioni, ai problemi e alle azioni disciplinari dei dipendenti per conformarsi alle politiche aziendali. Funge da contatto con le agenzie di lavoro interinale per programmare i lavoratori in modo che soddisfino i requisiti giornalieri di personale di produzione e per elaborare i registri salariali. Esamina e approva le fatture e affronta i problemi dei lavoratori temporanei come richiesto. Requisiti: Esperienza lavorativa di almeno 4-5 anni nella funzione HR, possibilmente come HR Plant in aziende manifatturiere. Ottime doti comunicative, inclusa la capacità di comunicare in modo efficace con le parti interessate interne ed esterne. Capacità di lavorare sotto pressione e rispettare le scadenze. Capacità di lavorare in modo indipendente e in conformità con le strategie aziendali. Doti di mediazione e negozziazione. Forti capacità di leadership, gestione e sviluppo di team, direttamente e indirettamente Inglese fluente Laurea Magistrale o titolo equivalente e conoscenza in magteria giuslavoristica.
For an important company leader in Leisure, Travel & Tourism sector we are looking for a: PRICING AND REVENUE MANAGEMENT SENIOR ANALYST The candidate will be responsible for managing the pricing and inventory strategy with the objective to maximize Company’s revenues by leveraging on pricing and occupancy optimization of the ships/markets assigned and of the transportation services where applicable. Key responsibilities For his/her assigned ships and programs, perform big data analysis to: - Forecast the demand and optimize prices and inventory on the basis of the analysis of booking trends, a deep understanding of the price elasticity and the support of an advanced scientific tool · Study business environment and monitor competition and define pricing positioning for Company’s product across world-wide markets and available sales channels · Manage the demand trends through price steering and promotion on each customer segment · Define allocation of cabins and seats capacity across different itineraries and products · Contribute to the successful implementation and use of our pricing optimization tool · Contribute to the financial revenue forecast process · Interact on a daily basis with Company’s sales&marketing teams as well as worldwide markets The ideal candidate has • 3-5 years experience in pricing and revenue management in global companies • Master's degree in Economics, Engineering Management, Mathematics/Statistics (or other studies with significant numerical background) • Data driven approach to decision making and complex problem solving, combined with business sense and commercial awareness • Optimistic and enthusiastic approach with high resilience to risks, challenges and pressure • Excellent communication and negotiation skills with strong entrepreneurial attitude • High proficiency in Excel, quantitative tools and Power Point • Good knowledge of English (at least B2 level is required) • Focus on promoting openness and transparency. • Passion for learning and researching, being open to welcome feedback and others’ ideas. • Open to diversity and cultural differences, always committed to enhance sustainability. • Excellence in team play & encouraging others in giving their best. Location: Genoa
For an important multinational company operating in Automotive sector, we are looking for a: PROCESS INJECTION TECHNOLOGIST Reporting to the Plant Process Engineering Manager, he/she will ensure that moulds, dies and tooling’s are at the disposal of the plant when needed by giving technical know-how and expertise in this area. Main activities and responsibilities: Prepare all the documentation of new moulds. Define process parameters for new moulds. Assure that project target of scrap effectiveness are achieved for new moulds. Supervise technically the repair of the existing moulds. Train and to give technical support to the Moulds Teams when necessary. Guarantee the fulfilment of the Health and Safety policies and procedures in his area of responsibility. Report to the Production Manager about his activity, as well as on new deficiencies detected in moulds, dies and tooling, etc. Report the Production Manager about his performance indicators of its supervised area. Actively cooperate with the Department in the maintenance, promotion and improvement of Occupational Safety and Health (OSH) and Environment Technical and personal skills: High School Degree. Minimum 5 years in a similar position. Aesthetical products evaluation skills. Functional products evaluation skills. Identification of problems' sources. Know-how on plastic materials. Launch and definition of changes/MAP on components. Launch and definition of MAP for thermoplastic moulds. Molding tools knowledge. Self confidence and self efficacy, verbal communication, initiative, organization of own work, job scheduling, tenacity, flexibility. English (Sufficient Level). Place of work: Moncalieri (TO)
For an important company leader in Luxury Goods we are looking for a Chief Operating Officer based in Romania. The company recently opened a factory near Sibiu. In the role the candidate will manage the plant (500 employees), coordinate plant functions, lead the management team, through high knowledge of management, processes, continuous improvement and organizational best practices. The role involves defining investments to improve company results, sharing budgets and achieved results with the corporate office; in addition defining strategies for the factory in Romania in order to optimize fixed costs and increase profitability. The ideal candidate is an italian willing to relocate to Romania or a local profile who speaks in italian.
For our client, leader in the travel/leisure industry, we're looking for a Strategic Sourcing Buyer He/She'll join in the Procurement & Supply Chain department to manage the Strategic procurement of the portfolio of meat category implementing short, medium and long term, strategies in line with the company needs and policy at the most competitive cost base. Responsabilities: Manage a complete Strategic Sourcing process: market analysis, vendors portfolio, negotiation, contract and all post contract activity Support the business needs definition and appropriate strategy implementation Representing the commercial and contractual interface between the company and all Category suppliers Manage all specification and contract documentation Monitor supplier performance Manage the operative and daily activity to ensure the continuity of supply Promote corporate culture and values among employees, leveraging positive relationships with the company’s leaders to obtain optimum results. Requirements: Degree in Economics and/or Bachelor in Logistics/Supply Chain Experience in the area of sourcing meat category Excellent in analytical skill IT-skills in MS Office (Excel, Word, PowerPoint) and affinity to IT system due to our own purchasing systems Independent, structured and result-oriented work and ability to work in a team Fluent English, any additional language is an advantage Excellent communication skills focused on promoting openness and transparency Focused on learning and research, welcoming feedback and others’ ideas Open to diversity and cultural differences Real team player able to encourage and help others in giving their best Strongly committed to enhance sustainability
Cookie | Durata | Descrizione |
---|---|---|
cookielawinfo-checkbox-analytics | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics". |
cookielawinfo-checkbox-functional | 11 months | The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional". |
cookielawinfo-checkbox-necessary | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary". |
cookielawinfo-checkbox-others | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other. |
cookielawinfo-checkbox-performance | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance". |
viewed_cookie_policy | 11 months | The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data. |