© Consea 2022. All right reserved
© Consea 2022. All right reserved
Per prestigioso gruppo Multinazionale, leader nel suo settore, stiamo cercando un/una:
HR People Development
La figura si occuperà di delineare, progettare e gestire i processi di sviluppo.
Nello specifico si occuperà di coordinare le seguenti attività:
Competenze e requisiti richiesti:
Sede di lavoro: Belluno
Per prestigiosa e storica realtà produttiva del settore medicale, stiamo ricercando per il loro Plant in provincia di Torino un/una: RESPONSABILE DI PRODUZIONE – AREA STAMPAGGIO La figura, a diretto riporto del General Manager, avrà le seguenti responsabilità: Assicurare la realizzazione della produzione nei volumi e standard richiesti pianificando le attività di produzione nel rispetto delle tempistiche previste Gestire il carico di lavoro del personale monitorando l’andamento della produzione per aumentare l’efficienza Analizzare gli scarti Organizzare e/o seguire interventi di ripristino delle anomalie di produzione Coordinare il personale di reparto stampaggio e magazzino centrale (turnazioni, ferie, permessi, corsi di formazione, visite mediche, assunzioni) Garantire il rispetto delle regole e delle nome di sicurezza Organizzare interventi manutentivi e/o attività di miglioramento delle aree di lavoro Garantire la corretta osservazione delle regole clean room, coordinando attività ordine e pulizia ordinaria e straordinaria Requisiti: Laurea o Diploma in Ingegneria Gestionale o cultura equivalente; Almeno 5 anni di esperienza nel ruolo, con il coordinamento di collaboratori; Ottime doti di leadership; Preferibile provenienza da settore stampaggio plastica, con alti volumi di produzione. Sede di lavoro: Cintura Sud di Torino
For an important and prestigious multinational industrial group leader in his sector, we are looking for: PRODUCTION ENGINEERING & MAINTENANCE MANAGER The candidate will take in charge and manage the production Engineering & Maintenance departments. Main responsibilities: • Ensure the management of comprensorial assets in terms of Safety and efficiency; • Provide the smooth operational maintenance and preventive maintenance in compliance with the relevant regulations and legal requirements; • Ensure and coordinate the Production Engineering Areas in the whole Plant for the existing products and assure a smooth new product introduction of the new projects • Define and manage investments for safety, environment, facility, building and cost reduction projects; • Define and manage the plant's Annual Capex and define the annual Expences in accordance with the Area Heads, EHS Manager, Quality Manager and Logistic Manager, monitoring its progress; • Ensure the monitoring of all Maintenance KPI's of the different Technology Areas as well as maintenance cost reduction KPI's; • Provide the management of the Working Capital of the indirect materials warehouse (Auxiliary and Maintenance); • Ensure the compliance of the technological system (General and Production Plants) with the relevant legal requirements in force; • Manage, and monitor the continuous improvement projects of production processes, ensuring their efficiency in line with assigned targets; • Manage all suppliers working in the plant to introduce process improvements, modification and/or maintenance as well as managing of indirect material warehouse; • Collaborate with HSE for Environment, Safety, Ergonomics projects and maintenance of legal requirements; • Managing of relations with 'external authorities' in cooperation with RSPP and Employe Main requirements: - Master Degree in Mechanical Engineering; - At least 7 Years of experience in managerial roles in Production Engineering and Maintenance Management in automotive sector or in multinational industrial components companies; - Process Development/Manufacturing operations Maintenance & facility management; - Knowledge of ISO Safety and Environment and IATF normative, Environmental and Safety legal requirements and WCM or other Lean Methodologies; - Solid knowledge of QA net. PFMEA, PCP, WI, PPAP procedures; - Solid knowledge of Maintenance processes in terms of TPM, AM and PM; - Excellent knowledge of Italian and English; - Collaborative approach with high adaptability to major changes in work tasks, high communication skills, to achieve customer and internal objectives. Employment level : Funzionario Location : Piemonte
For a multinational company operating in packaging sector, we are looking for a PRODUCTION MANAGER (with a professional path to the role of OPERATIONS MANAGER) Identify and implement productivity improvement projects to improve the profitability of the operation. Participate in the development of new projects to be launched in the plant, and lead project implementation, as requested. Be a change agent leader; drive the cultural transformation necessary to achieve world class performance by the organization. Main activities and responsibilities: Ensure all quality SOPs are followed and maintained. Schedule production for molding and assembly based on customer expected ship dates achieving perfect quality and ensure Hourly/Daily/Weekly/Monthly production reporting is accurate,. Immediately resolve off-schedule situations, variances to performance, lost time and production costs that are off-standard. Ensure process bottlenecks are known, perform gap analysis and drive continuous improvement plans to eliminate/reduce bottlenecks. Identifies and implements opportunities for improvement to KPIs – labor, machine rates versus target, scrap, etc. Work with maintenance to ensure machine uptime, including coordination of PM schedules with production schedules. Establish 5S / 6S program and ensure housekeeping procedures are followed. Implement waste elimination practices. Active participation with Engineering Dept. in system for mold repair - what is required to be done by when and when is the tool required back in production. With material handling team, develop and implement production planning & control techniques to improve responsiveness and flexibility. Conduct layered audits on a regular basis to confirm operator conformance to work/operator instructions coordinated with the quality team. Ensure adherence to a formal, structured and controlled process for process changes and engineering changes. Ensure bar coding of material and components is used throughout the manufacturing process to eliminate non value added effort and speed delivery of material/information – proper training, ensure accuracy and timely data entry. Manage the leads and operators. Reporting on the performance of the quality management system and on opportunities for improvement to management. Ensuring the promotion of customer focus throughout the organization and in particular, your area of responsibility. Ensuring that the integrity of the quality management system is maintained when changes to the quality management system are planned and implemented. Ensuring that the processes are delivering their intended outputs. Support all EHS activities and strictly adhere to all work instructions and safety procedures. Qualifications Bachelor’s degree in engineering, manufacturing or business. Minimum of 3-5 years of experience in manufacturing leadership positions. Technical background in injection molding and/or high speed assembly. ISO 9001. Quality Audits. Experience with developing and implementing successful solutions for complex manufacturing and supply chain problems. Project management. Proven people management skills and ability to develop a team. Good English verbal and written communication skills. Lean or Six Sigma qualification preferred. Location: near Vicenza.
Per Azienda Produttiva settore moda lusso ricerchiamo figura da inserire all'interno del Team di Pianificazione delle Produzione. La figura avrà il compito di seguire lo sviluppo e l’implementazione di nuovi tool e reportistiche di pianificazione per un’analisi ottimale delle commesse di produzione e della loro fattibilità, secondo le informazioni provenienti dagli enti interni ed esterni. MISSIONE Sviluppo di strumenti informatici di analisi della domanda e della fattibilità dei lanci di produzione, sulla base delle informazioni provenienti dall’ufficio acquisti, dal magazzino materia prima e dal reparto di industrializzazione Supporto operativo ad implementazione di nuovi tool per la pianificazione Creazione e manutenzione di reportistiche per il monitoraggio della fase di (start up) avviamento delle produzioni Aggiornamento dei dati di input nei sistemi legati all’attività di pianificazione (dati di domanda, MRP) REQUISITI Esperienza pregressa di almeno 3/5 anni in area Pianificazione/Avanzamento produzione Laurea in Informatica o Ingegneria gestionale Ottima conoscenza di Excel e Access Gradita conoscenza di AS400 o del programma Stealth Gradita conoscenza di tool di pianificazione (TXT Plan o simili) Propensione al lavoro in team Attitudine ad attività analitiche Precisione, metodo Buona conoscenza della lingua Inglese
Purpose of the job The purpose of this job is to set-up the supply chain controlling and support the local management through initiatives aiming at optimizing our costs and deploying best practices. The position encompasses various topics and requires becoming the business partner for the Supply chain Function. Key responsibilities Create reliable relationships with relevant stakeholders to properly monitor the P&L and prepare analysis to support tactical and strategic business decisions that lead to improve service and customer satisfaction; Re-define and oversee the process of collecting and organizing analytical data with the aim of supporting operational decisions. Regularly performance variance analysis for the P&L line under his/her responsibility Support during business cases analysis Build new metrics and KPI; monitor the consistency of the data presented in the various company reports at different levels Supporting a culture of accountability, mainly focusing on the Supply Chain through the identification and analysis of key KPIs to support continuous performance improvement Ensure that SAP system is fully set-up and implemented. Prepare all required ad hoc reports and implement all changes for systems. Participate in the design phase of new supply process, supporting decision making phase producing ad hoc analysis. Requirements Master’s degree in economics / Management engineering. Master’s in Finance is a plus. Minimum 5 years’ experience as financial controller in plants/industrial areas, better if in FMCG companies. Preferably experience in set-up a new supply chain environment Business acumen with strong analytical skills and structured approach Good level of autonomy and self motivated in achieving results Ability to work in teams Advanced data analysis skills and knowledge and use of SAP/Power BI; Proficiency in Excel and MS Office package Fluency in English Availability to travel 2-3 days/week
Sei interessato ad entrare in un team multifunzionale dedicato allo sviluppo di una nuova soluzione frenante, altamente innovativa con l’obiettivo di accrescere l’efficienza degli impianti frenanti dei veicoli e poter contribuire a ridurne le emissioni? Brembo sta perseguendo la sua mission attraverso soluzioni sempre più green ed innovative e con il supporto di Consea è alla ricerca di profili ingegneristici da inserire nel proprio organico. Potresti far parte anche tu del gruppo dedicato a questa innovazione tecnologica, cosa aspetti? MACHINERIES & AUTOMATION SPECIALIST ABOUT THE JOB Siamo alla ricerca di una persona da inserire all'interno della Global Central Function Industrial Operations - Lavorazione Meccanica Dischi che si occuperà di: Assicurare l’industrializzazione dei prodotti e dei processi di produzione mediante la definizione di macchinari e la messa in opera di impianti di produzione, l’elaborazione della relativa documentazione e la continua ricerca di innovazione, in ottica di miglioramento continuo; Contribuire alla scelta e alla valutazione dei fornitori di macchine e automazione, analizzando e confrontando le specifiche tecniche e le peculiarità tecnologiche presenti sul mercato e fornendo poi supporto all’Area Acquisti durante la fase di scelta e negoziazione dei macchinari; Assicurare la stesura e l’emissione dei capitolati per la definizione delle offerte dei macchinari e partecipa alle attività di verifica in sede di collaudo di macchinari e impianti; Assicurare lo svolgimento di attività di test su nuovi macchinari e impianti al fine di verificare il potenziale inserimento degli stessi in futuri processi produttivi. Minimun requirements: Laurea in ingegneria Meccanica; Esperienza di circa 23 anni maturata in ruoli analoghi, in ruoli di progettazione macchine; Ottima conoscenza della lingua inglese; Richiesta la disponibilità a trasferte in Italia e all'estero. Sede di lavoro: Mapello (BG)
For a major luxury company, we are looking for an: HR EXPERT Reporting to the HR Director, the HRBP guides and manages the overall provision of Human Resources services, policies, and programs for the site. The candidate will be the local business partner, acting as a consultant for company’s management on all issues related to human resources and supporting the growth of the site. Main responsibilities: Act as a strategic business partner to the client group, linking people, services strategy and business strategy to achieve their people and business objectives. Provide coaching, guidance and advice to leaders and employees within the business on people related impacts and issues Undertake performance management, investigations and grievances with the support of Employee Relations and ensure that these are managed and resolved in line with our policies and procedures and participate in resolving where required. Conducting and analyze exit interviews recommending changes when needed Plan and organize a proper induction for the new employees & monitor probation periods Plan and conduct new employee orientation to foster positive attitude toward organizational objectives Guarantee compliance with laws, internal rules or policies and collective agreements. Maintains the work structure by updating job requirements and job descriptions for all positions Provide current and prospective employees with information about policies, job duties, working conditions, wages, opportunities for promotion and employee benefits Maintain human resource staff job results by counseling and disciplining employees, planning, monitoring, and appraising job results Serve as a link between management and employees by handling questions, interpreting and administering contracts and helping resolve work-related problems Ensure that HR guidelines and policies are applied and adapted to local needs Participate in International HR activities Main requirements: Bachelor’s Degree required, Masters preferred 5 year’s of relevant experience within a manufacturing environment with a focus on the Operations Computer Proficient: Microsoft Office (Word, Excel, PowerPoint) and Lotus Notes Fluent English, French is a plus Ability to work collaborative within cross-functional teams and/or colleagues in LV Group Excellent interpersonal skills & approachability Ability to manage multiple priorities within a fast-paced changing environment Ability to work within diverse cultures with strong conflict resolution skills Workplace: Venice area
CHIEF OPERATING DIRECTOR Location: Poland, Subcarpathian Region Lead, direct, and control the day-to-day activities of the plants (3 locations) to achieve the production plan leading to achieve financial and operating objectives with high quality and safety standards. RESPONSIBILITIES: · Leads, directs and motors the day-to-day activities within assigned operational area. · Oversees P&L of the business line. ·Supervises and approves established budgets. ·Monitors the cost and effectiveness of production activities to guarantee optimization of resources; prioritizes spending, and achieves volume, quality, and manufacturing standards. ·Sets the targets and monitors the performance of the business against targets defined in manufacturing efficiency, cost control and sales revenue. ·Develops and implements a variety of operating policies and procedures (in conjunction with corporate subject matter experts) to ensure meeting business targets and quality standards. ·Supports organization development in all locations to ensure effective cooperation between the plants. ·Establishes and maintains a safe, legally compliant workplace and enforces compliance with all corporate policies and procedures. · Keeps and tracks records of constant improvements of KPIs. · Oversees research activities; evaluates and recommends necessary investments in technology, capital, equipment, systems, or other assets that will enhance the business’ capabilities. ·Leads, directs, evaluates and develops a team of functional and operational managers and other professionals to ensure targets’ achievement by all supervised facilities. ·Interfaces with Customers and helps solving their issues. ·Provides professional expertise and monitors performance to ensure that departmental and individual objectives are achieved within scheduled timelines and budgets. ·Implements continuous improvement and develop ways of working and processes to increase productivity, assure quality and safety and to mitigate production issues. · Manages Employee Relations together with Local and Group HR support; being involved in people development towards a culture that encourage bottom up initiatives and employees’ engagement. WORKING EXPERIENCE / KNOWLEDGE: · Min. 6 years’ multisite operations experience. · Must have demonstrated ability to create and lead teams and drive change. ·Must have strong attention to details and processes. ·Knowledge of mass-production processes. ·Demonstrated continuous improvement and problem-solving skills. ·Must have used to work directly with Customers. ·Must have demonstrated computer skills such as Microsoft Word, Excel, PowerPoint, etc. ·Bachelor's degree in industrial engineering, business administration or similar. ·Fluency in English. ·Clear driving license. SKILLS / COMPETENCES: · Ownership and Accountability. ·Business acumen. ·Team management. ·Process and result driven. ·Collaborative. ·Excellent organizational and inspiring communication skills. ·Excellent analytical skills. · Resistance to stress and openness to change. Percent of Travel Required Up to 40 % including international.
Per importante azienda leader nella produzione di acciaio stiamo cercando: TECHNICAL SUPPORT ENGINEER La risorsa sarà collocata all’interno della Funzione Qualità e rappresenterà il soggetto di riferimento nel rapporto tecnico fra l’Azienda e il Cliente per lo sviluppo dei prodotti e la risoluzione delle non conformità. Principali attività e responsabilità: Supportare la Funzione Commerciale nel contatto col cliente, anche attraverso visite congiunte. Analizzate gli aspetti tecnici legati alla definizione dei parametri di fornitura ed all’utilizzo del prodotto fornito attraverso la collaborazione col Cliente stesso. Assicurare la gestione delle eventuali non conformità esterne, anche attraverso l’intervento diretto presso i clienti, garantendo la definizione tecnica delle contestazioni ed impostando l’iter delle azioni correttive in Azienda. Collaborare con l'Area Laboratorio e Fattibilità all’analisi di fattibilità tecnica dei prodotti. Supportare, su richiesta della Funzione Commerciale, la gestione operativa delle visite cliente. Pianificare e gestire gli audit dei clienti in Stabilimento col supporto dell'Area Garanzia di Qualità e/o ualità di Prodotto. Provvedere, per i clienti di sua competenza, al monitoraggio degli indicatori di natura qualitativa che descrivono le performance del mercato, facendosi interprete delle relative azioni di miglioramento in azienda. Redigere per ogni visita eseguita presso il cliente un verbale tecnico e distribuirne copia a tutte le funzioni interessate. Requisiti richiesti: Preferibile Laurea in Ingegneria Industriale (Meccanica, Chimica, Aeronautica, Nucleare) o in Scienze dei Materiali Ottima conoscenza della Lingua Inglese e di una seconda lingua con preferenza per il Tedesco. Esperienza maturata in aziende operanti nel settore della produzione e lavorazione di acciai o affini. Caratteristiche personali: Disponibilità a frequenti trasferte in Italia e all’estero. Dinamicità, propensione al lavoro sia in autonomia che in gruppo e al problem solving. Buone capacità relazionali. Sede di lavoro: Provincia di Lecco
Posizione Inserita presso l'ufficio dei servizi contabili, con sede a BRESCIA e operante nel settore della consulenza contabile, fiscale e amministrativa, la persona ricercata si occuperà di gestire in autonomia gli adempimenti fiscali e di legge delle società del Gruppo. Le principali attività riguardano: ADEMPIMENTI IVA (LIPE, DICHIARAZIONI IVA, ECC.) PREDISPOSIZIONE DICHIARAZIONE DEI REDDITI DI PERSONE FISICHE, SOCIETA’ DI PERSONE E SOCIETA’ DI CAPITALI CALCOLO DEI REDDITI D'IMPRESA PER DIVERSI REGIMI FISCALI E VARIE FORME SOCIETARIE (Ditta Individuale, SNC, SRL) PREDISPOSIZIONE DI NOTE INTEGRATIVE E DOCUMENTAZIONE DI BILANCIO Requisiti diploma in Ragioneria e/o Laurea in Economia Aziendale; esperienza minima di 8/10 anni, preferibilmente maturata all'interno di studi commercialisti o realtà associative; esperienza consolidata nel lavoro in team. Completano il profilo un forte orientamento al risultato ed al problem solving, una personalità dinamica e proattiva con ottime capacità organizzative e di gestione dele scadenze. Sede di lavoro: Brescia
Cookie | Durata | Descrizione |
---|---|---|
cookielawinfo-checkbox-analytics | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics". |
cookielawinfo-checkbox-functional | 11 months | The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional". |
cookielawinfo-checkbox-necessary | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary". |
cookielawinfo-checkbox-others | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other. |
cookielawinfo-checkbox-performance | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance". |
viewed_cookie_policy | 11 months | The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data. |