Per un’importante azienda operante nel settore alimentare, ricerchiamo un/una: RESPONSABILE MANUTENZIONE & ENGINEERING La risorsa, a riporto del Direttore Industriale e del Direttore Tecnico, si occuperà di garantire l’efficienza degli impianti (elettrico, meccanico e automazione) e delle utilities dello stabilimento nel rispetto delle politiche definite, del budget e degli standard di qualità, igiene, sicurezza e GMP in ottica di miglioramento continuo. Principali responsabilità: Applicare le politiche di manutenzione definite con la Direzione Tecnica e la Direzione di Stabilimento proponendo e definendo i piani annuali di intervento, il relativo budget e gli obiettivi del proprio reparto: fermo macchina, tempi di ripristino, magazzino scorte, ecc.; Sviluppare ed attuare il programma di manutenzione preventiva e revisione annuale finalizzato alla riduzione dei fermi macchina e dei costi di manutenzione ed energetici; Garantire la tempestiva realizzazione degli interventi di manutenzione ordinaria (elettrica e meccanica ed elettronica) segnalati dagli operatori di linea e loro responsabili e dai tecnologi e dal reparto qualità; Proporre al Direttore Tecnico piani e progetti di miglioramento continuo dell’efficienza degli impianti e risparmio energetico attraverso l’analisi periodica dei guasti e dei problemi emersi e le implicazioni economico/organizzative; Supportare il Direttore Tecnico nei progetti di nuove installazioni fornendo, per la propria area di competenza, consulenza nella fase di stesura del progetto e coordinamento delle maestranze interne/esterne nella fase operativa di realizzazione; Garantire la corretta ed ottimale gestione del magazzino ricambi attraverso la definizione dell’allocazione dei pezzi e delle indicazioni per l’approvvigionamento e/o il ricondizionamento nel rispetto dei costi e delle linee guida aziendali; Assicurare la corretta gestione dei fornitori esterni attraverso la valutazione in fase di scouting dei requisiti e dei costi sulla base delle linee guida interne, il coordinamento e supervisione in fase di azione e la valutazione della conformità degli interventi alle richieste; Assicurare un’efficace gestione delle risorse umane coordinate; Contribuire a promuovere all’interno dello stabilimento una cultura della Qualità e di Lean Manufacturing Requisiti principali: Laurea in Ingegneria o cultura impiantistica equivalente; Esperienza nel ruolo di 5 anni con gestione di risorse in aziende di processo con forte attenzione su igiene/qualità (food plus) in contesti complessi ed elevato tasso di automazione; Conoscenza professionale della lingua inglese; Lean manufacturing; Leadership e gestione delle risorse umane; Orientamento agli obiettivi Orientamento al miglioramento continuo Analisi e pianificazione Problem Solving. Sede di lavoro: Provincia di Novara

For our client, an important Brand operating in the Fashion Luxury segment, we are researching a   Team Manager     As a Team Manager, you will be an ambassador of the Brand. You will take ownership to lead and coach your team, build Client relationships, proactively foster the achievement of sales goals and ensure that the highest level of Client experience is delivered. You will be responsible to recruit and build highly motivated teams, develop them to the next level and secure succession plans.     Main responsibilities:   Support your team with consistent coaching, identify their development and training needs, partner with the Field Coach Trainer to tailor individual action plans. Identify, recruit and develop talents, secure succession plans in collaboration with the Store Manager. Set individual and team goals; proactively assess and manage performance against expectations. Manage and motivate the team to drive business: create a positive and harmonious work environment, foster cooperation within the team and between managers. Support the team in building long term Client relationship, leveraging the different clienteling tools. Establish a Client-centric mindset in store to ensure the highest level of Client experience and proactively handle Client-related Situations. Communicate and inspire the team on corporate strategy and relevant business information (animate morning briefings, training). Proactively provide the Country office with product recommendations and qualitative feedback based on local knowledge about the market and Client needs, leveraging expertise and knowledge within the team. Put in place action plans to boost business and maximize product performance, leveraging visual merchandising, clienteling, training and team animation Act as a role model demonstrating sales leadership to the team, support them with their own sales, foster cross-selling and Client Repurchase. Build and develop own Client portfolio. Be the store point of reference to the Country Merchandising team, providing them with feedback (product performance, quality, Client related information, local market, competitors, trends, missing opportunities…) leveraging the Expert Advisors’ knowledge. Ensure policies, Brand standards and grooming guidelines are communicated and implemented; Support Operations team in inventory management; Support Store Manager in staff planning (workforce management).   Knowledge and Skills:   Management Skills, Leadership, Interpersonal Skills and Professional Attitude Curiosity, Empathy, Commercial Mindset. A fluent knowledge of the English language is required as also experience in Luxury sector.   Place of work: Rome

For a prestigious multinational group, we are looking for a:   MAINTENANCE SUBJECT MATTER EXPERT – CONTINOUS IMPROVEMENT EXPERT The Maintenance Subject Matter Expert is a member of the central Head Quarter Continuous Improvement Team inside Manufacturing Function, which coordinates and supports the Company Manufacturing Excellence worldwide. Main objective is the development and successful implementation system, with focus on the continuous improvement of the maintenance, to achieve significant cost savings, improve the reliability and uptime of the machinery, the management of spare parts and the efficiency of the maintenance organization.   Main responsibilities Developing and maintaining the standards and methods related to the Professional and Autonomous Maintenance improvement stream and creating the associated training material. Serving as a trainer about Maintenance standards and improvement methods inside the Company Academy, in order to create an adequate level of competence in the Head Quarter and in the Factories. Providing the necessary support to the Plant Directors, Maintenance stream leaders and improvement teams inside the factories, in order to successfully implement the standards and methods according to the Company System Road Map, also through dedicated missions on site. Identifying good practices, together with the Stream leaders in the factories and promoting their implementation in other factories, whenever convenient. Monitoring the progress of PMS implementation and projects achievements. Serving as an assessor during the audits, regularly performed in the factories. Has a technical background, reinforced by shop-floor practice, that will enable creative and cost-effective solutions applying the Maintenance improvement principles. Is a leader in the implementation of the continuous improvement system worldwide, capable of interacting with all levels of the organization. Develops an adequate level of competence about the Company organization, production process to support the successful implementation and the results of the continuous improvement as a whole. Technical and Soft Skills At least 5 years of experience in manufacturing, with a significative experience in maintenance management. Master's Degree in Engineering or Manufacturing Management. Fluency in English, other languages such as: German, Spanish, Portuguese, Romanian, Chinese, are considered a plus. Sound understanding of Manufacturing Improvement Systems. Sound understanding of the Professional and Autonomous Maintenance improvement methods. Ability to work in international teams. Travelling flexibility.   Location: Milan

For a dynamic company part of a foreign industrial group leader in its sector, we are researching : Managing Director   of the Italian distribution operation Division. The candidate should have an entrepreneurial and intercultural personality with clear focus on results, both in operations and business development. He will have to ensure the company long-term technological leadership and innovative capability, modernizing and optimizing processes according to the Operational Excellence Standard in terms of efficiency and performance, as well as supporting the group sales teams to ensure the group growth in the distribution activities. The position will report to the Group CEO (President).   Objectives The aim is to successfully continue the growth of the unit and to intensively develop the Italian and Export market in order to increase sales and earnings in a sustainable manner and to implement a continuous improvement culture in Operations.   Responsibilities and goals: Realization of profitable growth, increasing market share, especially in the distribution business, identification and systematic development of new markets and further strengthening the brand including monitoring competitors and other market conditions Expanding and maintaining sustainable customer relationships and attracting new customer; Development and implementation of measures derived from the group strategy and presenting these in a roadmap with clear milestones to ensure the long-term direction and operational management of the company; Proposing and executing an operational strategy consistent with the company growth ambitions, through promotion of the group continuous improvement tools and trough budget investment proposal with a full P&L responsibility Optimization and modernization of value creation processes, including the creation of efficient structures and achievement of operational excellence monitoring the Industrial activity. Monitoring plant performances and production to plan trough improvement of the main indicators (Safety Quality Cost Delivery Motivation) Create a relationship based on trust and constructive collaboration with the other sister companies and Head Quarter in general. Work closely with other country MDs to ensure potential alignment of business activities, taking full advantage of existing resources and potential synergies in product /technical developments elsewhere within the Group. Establishment of a modern management and performance culture, together with people development that encourages innovation and meets the development needs of junior staff and key talent in particular. Maintain and development of the Business Unit’s ethics and professionalism.     Skills and requirements: Degree in Engineering, an additional General Management qualification would be an advantage; Fluent knowledge of English language, French is a plus; Several years of professional experience as a generalist, managing autonomous business units or divisions with P&L-responsibility in Italy; Used to reporting duties and forecasting. An extensive experience in international B2B operations, sales and business development in the field of technically advanced products/solutions are mandatory; Previous experience in well-known medium-sized industrial manufacturing companies with a knowledge of Lean Manufacturing standards, ideally in the field of medium to high volume assembly operation or automotive tier 1/tier 2 operations with a track record; A solid experience (and mentality) in leading change/transformation/restructuring, as well as in process optimization is a plus; Ability to coach others, to establish and follow up goals for team members. Will relish new challenges and work well under pressure Excellent business acumen, able to identify Business Development opportunities Results oriented/achiever with a hands on approach Change oriented and customer centric Adaptive/open-minded, with a flexible mindset Drive, passion and entrepreneurial spirit Analytical mind, structured, well organized Used to work closely with a HQ abroad High integrity/value based person/trustworthy   Willingness to travel.   Forseen Level: Executive   Location Marche    

  On behalf of a Luxury Section Company (Brand) in Florence we are looking for a Senior Production Planner (Shoes category). Main responsibility: - Monitoring the advancement of production among suppliers - Planning and advancement of intermediate manufactures - Interface with Distribution, Customer Service, Merchandising (meeting, weekly call) - Planning and validation of new season and Retroplanning - Monitoring cancellations end season - Planning with production capacity each suppliers - Advancement of Master and TDS suppliers - Management SAP, Portal, PLM Requirements: - Fluent knowledge of English - Master Degree in Management Engineer - Previous experience in the role

Per primaria realtà industriale del settore Automotive, stiamo ricercando un/una:   NEW PROJECT INDUSTRIALIZATION SPECIALIST   La risorsa, a riporto della Direzione Engineering, avrà la responsabilità end to end per il perimetro a lui/lei assegnato nell’ambito della industrializzazione di nuovi prodotti, interfacciandosi per tutti i progetti con l’Ente engineering nelle fasi iniziali di progetto (Preventivazione) per poi coordinare tutte le attività a livello di plant sia per l’approntamento delle campionature che per l’attività di maturazione e validazione processo fino alla fase di produzione di serie.   PRINCIPALI RESPONSABILITÀ Interfacciarsi con l’ente Engineering nelle fasi iniziali di preventivazione circa la valutazione della capacità produttiva del potenziale plant di destinazione e per progetti complessi presiede sin da subito il team con l’obiettivo di fare la verifica del ciclo produttivo e la valutazione del rischio di fornitura Presiedere il team di plant dedicato coordinando tutte le attività necessarie per il raggiungimento degli obiettivi di timing, qualità e redditività di tutti i nuovi prodotti Assicurarsi che in base alle classi di prodotto definite le input list, le check list ed i kpi siano sempre aggiornati evidenziando in tal modo errori o ritardi con logica a semaforo (verde giallo rosso) Verificare nell’ambito del team di progetto EMEA lo stato di avanzamento dei progetti e supportare nel risolvere eventuali conflitti interfunzionali Gestire il processo di industrializzazione end to end Coordinare il miglioramento dei processi con focus su learning by doing Gestire le Best Practices in ambito processi produttivi Standardizzare i processi produttivi in ottica di continuous improvement REQUISITI Laurea in Ingegneria Meccanica/ Gestionale Conoscenza approfondita dei processi produttivi quali stampaggio, lavorazioni meccaniche, trattamenti termici ecc.. Conoscenza del project management come strumento di lavoro da applicare al processo di industrializzazione Conoscenza approfondita struttura dei costi in aziende manifatturiere: costi fissi costi variabili B/C Possibilmente avere maturato un’esperienza significativa di almeno cinque anni in ambienti automotive con certificazione ISO 9001 e se possibile IATF 16949. Capacità di analizzare in modo logico le problematiche per arrivare alla causa radice dei problemi e di pianificare le attività connesse. Capacità di lavorare in team polifunzionali e gestione obiettivi attraverso il project management approach. Strumenti della “Qualità”: APQP; PPAP Buona conoscenza della lingua Inglese   Sede di lavoro: Cintura Sud di Torino

For a prestigious italian multinational group, a Leader in the food sector, we are looking for a brilliant: IT Data Engineering Specialist Position Overview: We are seeking a Data Engineer profile to join our growing IT team, who will be responsible for expanding and optimizing our data and data pipeline architecture, as well as optimizing data flow and collection for cross functional teams The ideal candidate will have a minimum of 3/5 years with an experience on data pipeline building, who enjoys optimizing data systems and building them from the ground up. The Data Engineer will support our project managers, data analysts on data initiatives and will ensure optimal data delivery architecture is consistent throughout ongoing projects. The right candidate will be excited by the prospect of optimizing or even re-designing our company’s data architecture to support our next generation of products and data initiatives.  Main responsibilities: Build, maintain and optimize data pipelines for extracting, transforming, and loading (ETL) data from various sources. Design and implement scalable data architectures, data models, and databases to support business analytics and reporting needs. Integrate data from various internal and external sources and ensure the quality and consistency of data across different systems. Implement data validation checks, data quality metrics, and maintain data governance practices to ensure data accuracy and security. Work with large-scale data processing frameworks and other distributed systems to handle big data workloads. Leverage cloud-based data solutions and infrastructure for data storage, processing, and analytics. Collaborate with data scientists, analysts, and other stakeholders to understand data needs and ensure data infrastructure aligns with business objectives. Identify and implement performance optimizations for data storage, retrieval, and processing. Collaborate in priority definitions of each initiative, defining value, feasibility, and economic impacts. Automate repetitive tasks related to data ingestion, processing, and monitoring Ensure that data engineering practices comply with data privacy laws and organizational security policies. Implement monitoring systems for data pipelines and quickly troubleshoot issues as they arise. Participate in the testing stages from design, execution, integration and acceptance, providing adequate business process knowledge. Design and deliver end-user training and training materials/sessions; provide technical support as necessary.  Troubleshoot systems and software; performance-tune these applications as necessary. Collaborate with external vendors and service providers as needed to support IT initiatives and resolve issues. Closely collaborate with the other IT teams to ensure that, while evolving and operating the solutions in scope, an end to end consistency is kept within the entire application and infrastructure landscape.   Build and maintain excellent and productive working relationships with key business stakeholders, 3rd parties/external sourcing partners and all IT and business colleagues.   Qualifications: Bachelor's degree in Information Technology, Computer Science or Mathematic or related field. Minimum of 3/5 years of experience as IT data engineering, preferably in environments with production plants. Experience with ETL tools, SQL, Python, or other programming languages used for data processing, and knowledge of data pipeline orchestration tools Proficiency in data modeling, database design, and experience with both SQL and NoSQL databases (eg mySQL) Experience with data integration tools and platforms, familiarity with APIs, and data warehousing solutions (e.g. BigQuery) Knowledge of data governance frameworks, data quality management practices, and experience with data validation tools Experience with big data tools and platforms, proficiency in distributed computing concepts, and knowledge of cloud data services (e.g., AWS, Azure, Google Cloud) Experience with cloud platforms (e.g., AWS, Azure, Google Cloud), cloud-native data tools (e.g., AWS Glue, Azure Data Factory), and serverless computing Fluent English, native Italian   Personal Attributes: Able to prioritize and execute tasks according to deadline in a high-pressure environment. High customer focus attitude with sense of responsibility/ownership for any business need, issue/incident involving delivery and/or AM services. Strong communication skills, ability to work in cross-functional teams, and experience translating technical details into business insights. Proven problem-solving skills and ability to troubleshoot technical issues efficiently. Curiosity, a passion for continuous learning, and the ability to adopt new technologies. "Hands on" style with clear commitment to understand/ investigate/ analyze/ address/ challenge/ improve current status/ problems. Mobility for business traveling (typically Trieste or Milano). Location: Trieste or Milan

DESCRIPTION DE LA FONCTION Pour une importante entreprise italienne du secteur alimentaire, nous recherchons: COMPTE CLÉ GD/ RHF ET CATÉGORIE MANAGER GD Objectif de la Fonction et Responsabilités: Mettre en œuvre la stratégie et la politique commerciale pour la France Développer les volumes, le CA et principalement la marge des clients dont il a la responsabilité dans le cadre de la politique commerciale préalablement définie Assurer le développement des gammes dans le cadre de la stratégie commerciale auprès des centrales qui lui sont affectées Garantir la profitabilité des centrales d'achats dont il a la responsabilité Négocier les accords de coopérations commerciales Piloter le publi promo avec tous les clients et assurer la bonne gestion budgétaire de ses clients Assurer les revues d'inno annuelles et Analyser les Datasharing et autres indicateurs (Panels..) pour developper le mix 4P auprès des services marketing des enseignes Assurer les négociations régionales Leclerc / Intermarché et la performances des agences commerciales Garantir la bonne communication auprès des services internes (ou externe Prosend) concernés, les mouvements structurels et/ou organisationnels de ses centrales (logistique, facturation,…) Apporter une contribution active dans l'élaboration de la stratégie commerciale (préparation des leviers "4P" par clients et recommandation de la politique commerciale) et réalisation de la revue d'inno annuelle Définir les objectifs CA, volume et marge par client Négocier les accords commerciaux en respectant la stratégie de négociation par client préalablement définie Animer les distributeurs Food service (explication produit + mise en œuvre auprès des forces de vente, master class..) Contrôler et optimiser le suivi budgétaire par enseigne (budget alloué, facturation à date, solde, actions correctives,…) Recommander (en relation avec les chargés de promo) et établir le suivi du publi promo avec tous les clients via le suivi hors contrat Analyser les Datasharing et les panels (Nielsen…) pour etre force de proposition auprès des services marketing des enseignes sur les leviers 4P en phase avec la stratégie de l'entreprise Participer aux salons clients et professionnels Principaux prérequis: Formation: Ecole Supérieure de Commerce (Bac+2 minimum) Contribution au travail en équipe: fait preuve d'esprit d'équipe, communique et partage de manière transparente et directe Respect des consignes: respect des normes et des procédures, respect des délais, rigueur dans l'utilisation des outils, fiable, sens de la confidentialité Capacité à communiquer: sens de l'écoute - sens du contact - capacité de persuasion Maîtrise des techniques de ventes et de négociations Connaissance des circuits de distribution Curiosité Lieu de travail : Paris Rapporte au Directeur commercial France

For an important multinational company, one of the world’s leading providers of drive and control technologies, we are looking for a: SALES ENGINEER BU AUTOMATION & ELECTRIFICATION   Main activities and responsibilities: Be responsible for sales development of Automation & Electrification solutions. Work very closely with the manufacturing plants and corporate/engineering offices and is expected to build strong relationships with key management personnel. Interface and coordinate activities with Distributors.  Track and drive new sales opportunities and progress at assigned accounts/markets. Provide excellent customer service and timely responses while interfacing with internal and external customers and distributor(s). Provide necessary support to assigned customers in order to achieve sales goals. Perform product launches, presentations and product demonstrations with support from others in the organization. Identify and pursue new opportunities and applications for company’s products. Ability to work in a team environment with shared goals to aid in the execution of overall business strategy.   Technical and personal skills: Bachelors of Science Degree in Technology or Engineering (EE, Software, ME Systems etc.) field 5 plus years of experience selling industrial controls including cold calling. 5 plus years of experience establishing and managing relationships with customers. Existing relationships expected. Knowledge of factory automation used in Stamping, Powertrain/Propulsion, and Final Assembly (preferred). Experience in programming PLCs, CNCs, motion controls, and/or servo drives a plus (preferred). A basic understanding of the growing trends such as Industry 4.0, flexible manufacturing, and Electrification. Experience and ability in solving problems at technical, commercial, and operational level. Strong communication, negotiation, and organizational skills. Self-starter, goal oriented. Availability to travel.   Place of work: North West Area

For a prestigious multiational group leader in the automotive sector, we are looking for a/an: Key Account Manager   Reporting to the Sales Director, the key account manager has the primary function to guarantee, maintain the growth of sales on customers.   Main duties  Collaborate with senior team to set revenue goals and company strategy and implementing a sales plan to drive revenue growth and attending key events to generate leads; Define and execute appropriate sales strategies; business development, marketing, technical, ad operations and sales support programs to maximize sales and profitability with the following customers; Determine annual unit and gross-profit plans by implementing marketing strategies; analyzing trends and results; Establish sales objectives by forecasting and developing annual sales quotas for regions and territories; projecting expected sales volume and profit for existing and new products; Find solutions and deliver results within a rapidly changing, entrepreneurial, technology-driven culture; Work with the Sales, Account Management and Operations, teams to implement targeted sales strategy; Work with internal teams on behalf of clients to ensure the highest level of customer service; Interface with technical support internally to resolve issues that directly impact partners; Report on key KPIs related to the lead and the opportunity waterfall in order to implement a consistent closed-loop between marketing and sales; Monitor the quality of marketing and sales information and define data improvement programs; Understand the impact of operational initiatives from a sales or marketing perspective.   Main requirements   Fluent in English; 5 years of experience in managing Stellantis and Tier 1 customers in the automotive industry (expertise with French customers is a plus) Able to work under stress; Flexible, agile, teamwork oriented;   Curious and proactive; Able to talk with upper stream management and downstream management; Oriented to customer intimacy and familiar with change management issues; Problem solving capabilities.   Workplace: Novara