© Consea 2022. All right reserved
© Consea 2022. All right reserved
On behalf of an international luxury Company, we are now looking for a Senior Production Planner that should manage the industrial production plan and guarantee the production timing
The candidate, reporting to the Production Manager, will be responsible for:
Requirements:
Workplace: Province of Firenze
For a multinational company leader in automatic data capture and process automation, we are looking for a R&D HARDWARE SENIOR ENGINEER. The Senior Hardware Engineer is part of a development team building and working autonomously on the design of part of the system (HW board or FPGA or firmware). He/She is involved in all areas of development from design to test. Design HW Architectures (allocating Analog/Digital processing resources, microprocessors and memories, communication interfaces) of mid-complex Opto-Mechatronics & SW Embedded Systems. Main responsibilities: Design HW Architectures (allocating Analog/Digital processing resources, microprocessors and memories, communication interfaces) of complex Opto-Mechatronics & SW Embedded systems Splitting a complex design into simplest task Evaluating and providing recommendations on the project efforts Designing the test plan and adopted procedure Ensuring sustainable design of the product subsystem in his/her scope of responsibility adopting standardization principles and robust design methodologies Documenting the concept definition choices, the testing methodology, the strengths and weaknesses of the solutions implemented Fixing bugs during the integration phase and guarantee sustaining activities on existing products Requirements: Master’s Degree in Electronic Engineering or Computer Science Engineering or a related discipline Fluent in English Advanced knowledge (both Analog Design and Digital Design) of complex HW platform design, main electronic components (Microprocessor, Flash, RAM, FPGA/CPLD, Ethernet PHYs, with relative power supply solutions) and Microprocessor architecture (single/multi core ARM or DSP) Advanced knowledge of Main Communication Protocol Interfaces (Serial, I2C, SPI, Ethernet) and High Speed Communication Protocol Interfaces (LVDS, MIPI, PCI-Express, ecc..) Advanced knowledge of Electronic CAD (Mentor Graphics) and PCB layout design and rules (Signal Integrity, Impedance Control, ecc..) Advanced knowledge of CMOS Image Sensor and CCD Linear Sensor technology Advanced knowledge of main Electronic Laboratory Instruments and tools (Power supplies, Oscilloscopes, Logic Analyzers, Signal Generators, ecc..) FPGA/CPLD design and programming knowledge (VHDL) Main Industrial Fieldbus protocols knowledge (TSN, Ethernet-IP, Profinet, Profibus, Canopen, ecc..) C, C++, Python, MATLAB programming capability Location: Bologna area
Sei interessato ad entrare in un team multifunzionale dedicato allo sviluppo di una nuova soluzione frenante, altamente innovativa con l’obiettivo di accrescere l’efficienza degli impianti frenanti dei veicoli e poter contribuire a ridurne le emissioni? Brembo sta perseguendo la sua mission attraverso soluzioni sempre più green ed innovative e con il supporto di Consea è alla ricerca di profili ingegneristici da inserire nel proprio organico. Potresti far parte anche tu del gruppo dedicato a questa innovazione tecnologica, cosa aspetti? TECHNOLOGIES INNOVATION SPECIALISTS - Laser Metal Deposition and Cold Gas Spray ABOUT THE JOB Siamo alla ricerca di una persona esperta dei Processi Laser Metal Deposition (LMD) e delle tecniche di Cold Gas Spray da inserire all'interno della Global Central Function Industrial Operations - Lavorazione Meccanica Dischi, si occuperà di: Contribuire alle attività di innovazione dei processi legatI ai dischi Coated, dischi in ghisa con rivestimenti in acciaio con carburi doppio e/o singolo layer sulle fasce frenanti; Definire i processi rispettando i target del piano di sviluppo prodottoprocesso; Curare lo sviluppo di processi innovativi dalla fase di preventivazione fino alla delibera produttiva nel rispetto delle performance di costo/capacità produttiva/tempistiche; Contribuire alla valutazione tecnica dei fornitori, fornendo supporto ai siti e ai reparti produttivi per il raggiungimento degli standard qualitativi aziendali. Minimun requirements: Laurea in Ingegneria Ingegneria Meccanica o similari; Esperienza di circa 5 anni in ruoli analoghi; Buona conoscenza della lingua inglese; Disponibilità a trasferte. Sede di lavoro: Mapello (BG)
Per prestigiosa realtà di stampo multinazionale, leader del settore della componentistica meccanica e meccatronica stiamo ricercando un/una: Responsabile Amministrativo Il/La Candidato/a, inserito nell’Ente Finance, a riporto del CFO avrà il compito di supervisionare, organizzare e coordinare i servizi amministrativi, contabili e finanziari dell’azienda. PRINCIPALI COMPITI E RESPONSABILITA’ Assicurare il trattamento contabile delle transazioni economiche patrimoniali e finanziarie in base alla normativa vigente e sovrintende alla realizzazione del bilancio consolidato di esercizio. Analizzare gli scostamenti tra quanto programmato e quanto realizzato, individuando i fattori e le cause determinati, prospettando interventi migliorativi nella gestione aziendale e proposte sulla strategia di medio termine. Padroneggiare l’intero processo di gestione contabile, fiscale, finanziario e di budgeting. Adottare le operazioni di chiusura e le metodologie di redazione del bilancio nel rispetto delle norme civilistiche e fiscali. Elaborare la reportistica mensile sull’andamento economico e finanziario aziendale. E’ responsabile della funzione amministrazione e contabilità e si occupa di coordinare le risorse umane che gli sono state assegnate. COMPETENZE Il candidato ideale dovrà possedere i seguenti requisiti: Laurea o Diploma in Economia o Finanza; Pregressa esperienza di almeno tre anni nel ruolo; Solida comprensione dell'analisi finanziaria; Ottima conoscenza della lingua inglese; conoscenza di adeguati pacchetti software di contabilità, finanza e tesoreria; Buone capacità interpersonali e di comunicazione a tutti i livelli aziendali. Team Management. SEDE DI LAVORO: Provincia di Modena
Per azienda nostra cliente specializzata nel settore construction ricerchiamo un/una: ADDETTO FINANCE Sarà responsabile delle seguenti attività: Analisi patrimoniali e finanziarie dei budget delle commesse e supporto alla relativa pianificazione finanziaria Sviluppo di piani economici finanziari e analisi quali-quantitativa degli stessi Analisi del piano commerciale al fine di individuare le necessità finanziarie del gruppo Analisi contratti delle commesse Supporto per la negoziazione e monitoraggio dei contratti di finanziamento e garanzie Supporto nelle attività riguardanti le operazioni finanziarie ordinarie e straordinarie Analisi finanziarie utili alla definizione della strategia della Società Coordinamento risorse Requisiti Laurea magistrale/specialistica in Economia o Ingegneria Conoscenza approfondita del pacchetto office, in particolare Excel Rappresenta requisito preferenziale aver lavorato almeno 5 anni nel settore delle infrastrutture o in team di transaction services o project financing Attitudine analitica, proattiva e volta alla risoluzione dei problemi Capacità di lavorare in squadra Sede di lavoro: Roma
Purpose of the job The purpose of this job is to set-up the supply chain controlling and support the local management through initiatives aiming at optimizing our costs and deploying best practices. The position encompasses various topics and requires becoming the business partner for the Supply chain Function. Key responsibilities Create reliable relationships with relevant stakeholders to properly monitor the P&L and prepare analysis to support tactical and strategic business decisions that lead to improve service and customer satisfaction; Re-define and oversee the process of collecting and organizing analytical data with the aim of supporting operational decisions. Regularly performance variance analysis for the P&L line under his/her responsibility Support during business cases analysis Build new metrics and KPI; monitor the consistency of the data presented in the various company reports at different levels Supporting a culture of accountability, mainly focusing on the Supply Chain through the identification and analysis of key KPIs to support continuous performance improvement Ensure that SAP system is fully set-up and implemented. Prepare all required ad hoc reports and implement all changes for systems. Participate in the design phase of new supply process, supporting decision making phase producing ad hoc analysis. Requirements Master’s degree in economics / Management engineering. Master’s in Finance is a plus. Minimum 5 years’ experience as financial controller in plants/industrial areas, better if in FMCG companies. Preferably experience in set-up a new supply chain environment Business acumen with strong analytical skills and structured approach Good level of autonomy and self motivated in achieving results Ability to work in teams Advanced data analysis skills and knowledge and use of SAP/Power BI; Proficiency in Excel and MS Office package Fluency in English Availability to travel 2-3 days/week
For a multinational company, leader in the retail sector, we are looking for a: GLOBAL CATEGORY MANAGER IT The candidate will deal closely with Global/Regional and Countries IT teams, in order to define Global sourcing strategies, operating models and solutions to support company’s IT strategy. He/She will be responsible for the procurement of all the IT and Professional Services, according to the allocated budget. He/She will have to manage key strategic relations with international suppliers. The candidate will be responsible for the development of the IT internal network. Main requirements: Bachelors’ degree preferably in economical or technical disciplines. At least 8 years in experience in sourcing of IT services within multinational and dynamic companies. Fluent in English Excellent organizational, interpersonal and communication skills Team oriented Strong flexibility Availability to travel Workplace: Milano
For a leading Tier 1 multinational company in the Automotive sector, we are looking for a: AUTOMATION ENGINEER The figure, included in the Automation & IoT Department, reporting directly to the Division Manager, will have the following responsibilities: To develop, in codesign with supplier during the preliminary concept of the product/project, the needed suitable automation solutions to guarantee the best balance between local labour cost and investment amount, consistently with process variable cost estimation in the offer phase To define the technical specifications ( including machine description, capability with parameters and required standard,..) of the machinery or tools related to the involved section of the process ensuring the application of the standards To collaborate with the Purchasing dept. in the supplier Machinery/ tools nomination phase through the offer analysis To collaborate with Product Design for the tools feasibility To manage the investments of the machinery / tools ensuring the adherence of the spending according to the foreseen cost in the offer phase To define the supplier activities schedule for each machinery / tools, consistently with the overall product development Gantt. To monitor the construction progress status, visiting periodically the supplier site and defining, in case of deviations, suitable recovery action plans agreed with Process Leaders To ensure the supervision of the technical test of the machinery / tools at the supplier site, verifying the compliance with technical requirements and expected cycle time target; to give the approval for the machinery / tools transfer to the manufacturing plant according to the existing acceptance rules To define the typology and the amount of materials and auxiliary tooling that are necessary for the testing of the machinery To manage machinery / tools modification and tuning after each test To organize, in case of specific dedicated project, the FMEA process in order to identify the quality risk of the product and put in place the automatic controls To guarantee the availability of make components (by soft or hard tooling) consistently with the product development plan To coordinate the machinery / tools handover to the manufacturing plant coordinating the activities related to the industrial trials in collaboration with the plant To coordinate the installation and acceptance and of the machinery/tooling, monitoring and confirming its capability with the plant Production Engineering for the final approval To provide the plant Production Engineering with the technical data (machine guide, utilization manual, spare parts list,..) concerning the new machinery / tools , supporting them in the training of the involved associates To collaborate in the definition of the required actions to set up the area of the installation of the machine ( including water, air, electric energy ,..) and to guarantee the legal and safety compliance To collaborate in the preparation of the preventive maintenance sheets/plan and manual To collaborate with the Production Engineering of the plant in the machinery modification and improvements. To support the plants in the kaizen activities collecting the improvement ideas and defining potential new standards Skills requested: Mechanical design Basic electrical design knowledge Machinery directive (Safety) Vision Systems Robots Spec definition & Project management Economics English
Per un’importante azienda operante nel settore alimentare, ricerchiamo un/una: RESPONSABILE PROGRAMMAZIONE E LOGISTICA La risorsa, a diretto riporto del Responsabile di Stabilimento, si occuperà di assicurare la programmazione della produzione sulla base del Piano di Produzione ricevuto e della disponibilità delle materie dirette, massimizzando efficacia ed efficienza. Sarà, inoltre, responsabile per il corretto funzionamento della catena delle forniture e degli approvvigionamenti nelle diverse fasi del processo fino alla spedizione del prodotto finito. Principali responsabilità: Assicurare per lo stabilimento di competenza la schedulazione della produzione coerentemente con la Pianificazione Centrale ricevuti con l’obiettivo di ottimizzare richiesta ed efficienza e condividerla con le funzioni di stabilimento coinvolte; Assicurare la corretta disponibilità di materie prime, ingredienti e materiali di confezionamento per garantire la fattibilità dei piani produttivi di breve, medio e lungo periodo correlando le giacenze con i consumi reali: interfacciandosi con l’ufficio acquisti e con i fornitori; Garantire la corretta emissione degli ordini; Garantire l’ottimale gestione del magazzino, dei ricevimenti e delle spedizioni in termini di quantità, qualità e layout utilizzando i sistemi preposti e nel rispetto delle norme di qualità; Garantire la sicurezza nell’ambito della propria funzione organizzativa: Applica le norme legate alla sicurezza con speciale attenzione alle movimentazioni interne e alla verifica del corretto stato di funzionamento dei dispositivi e delle attrezzature; Implementa le soluzioni organizzative atte a ridurre i rischi per il personale operativo. Supportare il Direttore di Stabilimento nella consuntivazione dei KPI di plant; Contribuire al progetto miglioramento continuo dei processi e dei sistemi dedicati e favorire la creazione e la diffusione di una cultura di servizio e di responsabilizzazione sui risultati; Assicurare la gestione dei propri collaboratori in linea con le politiche aziendali utilizzando gli strumenti previsti (VSP). Requisiti principali: Laurea in Statistica/Ingegneria/Economia Aziendale; Esperienza nel ruolo di almeno 3 anni all’interno di realtà produttive, preferibilmente del settore alimentare; Conoscenza dei sistemi e logiche di programmazione della produzione; Conoscenza dei flussi logistici; Conoscenza di un sistema ERP e ottima conoscenza di Excel; Leadership e gestione delle risorse umane; Forte Coinvolgimento nella vita dello stabilimento (andare sulle linee e in magazzino); Forte sensibilità numerica (analisi e interpretazione dei dati); Problem Solving. Sede di lavoro: Provincia di Novara
Per prestigioso gruppo italiano multinazionale, leader nel settore food, ricerchiamo un/una brillante: PROJECT MANAGER Siamo alla ricerca di una persona da inserire all'interno della Direzione Innovation e Development che, come PM, si occuperà di: - assicurare la pianificazione, il coordinamento e la verifica, in accordo con il proprio responsabile, delle attività di progettazione, prototipazione e sperimentazione fino a ottenere la delibera tecnica del prodotto e la sua validazione; - garantire il riferimento tecnico all’interno della Piattaforma per le attività di progettazione, sviluppo e validazione del prodotto e la verifica delle attività di avanzamento dei progetti; - supportare l'area Technical Development e la R&D nella ricerca, sviluppo e gestione di progetti innovativi riguardanti nuovi materiali e processi correlati; - monitorare la fattibilità, i tempi ed il budget; - supportare il team dell’After Sales per le attività di customer services. Minimun requirements: - Laureati/e in Ingegneria Meccanica/Elettrica; - Esperienza di circa 2-3 anni maturata in ruoli analoghi e in contesti aziendali strutturati; - Ottima conoscenza della lingua inglese; - E’ richiesta la disponibilità ad effettuare trasferte in Italia e all’estero. Sede di lavoro: Trieste
For KERING EYEWEAR we are seeking a Business Controller who will be part of the Finance Team, based in Padova. How you will contribute Carrying out regular business performance analysis, analysing variances from budget/forecast with particular focus on subsidiaries Participating to the Business Reviews together with Functional Heads Identifying and implementing actions, in order to guarantee the achievement of performance targets Proactively supporting in the annual budget and forecast production for the areas of responsibility Preparing and sending specific reporting packages to the HQ with focus on Brands, Geographies, Strategic Business Plan, Channel Evolutions and Brand Positioning by Market Managing Profit & Loss Analysis by Business Responsibility Performing ad hoc analysis and controlling tasks Who you are Degree in Business Administration with excellent results (MBA being a plus) At least 5 years of working experience in similar role within international and structured organizations International experience is a plus Knowledge of SAP Proficient Microsoft Office suite user with focus on Excel Knowledge of International Accounting Standards (IFRS) Ability to design and measure KPIs, with specific focus on the P/L Ability to work cross-functional, close to business and customers with a solid business partner attitude Ability to understand business models and build business plans Ability to prioritize activities, work with flexibility and to handle stress Ability to work within fast growing environments and to contribute to build a new organization Strong leadership, which inspires colleagues and stakeholders Problem solving and decision making Communication and interpersonal skills Team work, proactivity, entrepreneurship Availability to travel
Cookie | Durata | Descrizione |
---|---|---|
cookielawinfo-checkbox-analytics | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics". |
cookielawinfo-checkbox-functional | 11 months | The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional". |
cookielawinfo-checkbox-necessary | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary". |
cookielawinfo-checkbox-others | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other. |
cookielawinfo-checkbox-performance | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance". |
viewed_cookie_policy | 11 months | The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data. |